Hostacom TRC 352N NA2 82V T SCHW

LyondellBasell

Description

Hostacom TRC 352N NA2 82V T SCHW high melt flow, high flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has excellent impact/stiffness balance, good flowability properties, low gloss and excellent scratch resistance. It is typically used for interior automotive applications.

Availability

North America

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 18 g/10 min
Density (23 °C) 1.05 g/cm³
Flexural Modulus (23 °C, 2 mm/min, Chord) 1850 MPa
Tensile Stress at Yield (23 °C, 50 mm/min) 20 MPa
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 35 kJ/m²
Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) 4.5 kJ/m²
Charpy Impact Strength - Unnotched (23 °C, Type 1, Edgewise) No Break kJ/m²
Mold Shrinkage

Technical Data Sheet

Technical Data Sheet

Process

Injection Molding


Resin

Polypropylene Compounds


Applications

Automotive Parts, Instrument Panels, Interior Automotive Applications


Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications